Steps To Jump A Car

Steps To Jump A Car. Park both cars nose to nose about a foot and a half apart. For a fast and safe jump start follow these 10 steps.

How to use jumper cables to jump start a car from another vehicle: Park the car with the good battery nose to nose with yours without the two vehicles touching, close enough that the jumper cables will reach. Make sure that the battery giving the jump has enough voltage and is a matching voltage system type.

How To Jump A Car.

Park the car with the good battery nose to nose with yours without the two vehicles touching, close enough that the jumper cables will reach. First, bring the working car engine close to your own. Turn off both of the cars, take out the keys, and place both cars in neutral with the parking brakes on.

Connect The Portable Jump Starter To The Car Battery Via The Provided Clamps And In The Correct Order.

Many newer cars have electronic components and computers that can be damaged. Open the hoods of both vehicles. Then, attach the red (+) clamp to the positive terminal of the working battery.

To Make Sure The Jumper Cables Reach, Park The Second Car In Front Of The One With The Dead Battery So That Both Front Bumpers Are Facing Each Other.

Your portable jump starter has two cables coming out of it with alligator clamps. Make sure that the source vehicle is running, the dead car is turned off. Modern cars aren’t as straightforward as older models.

Select A Good Pair Of Jumper Cables Or A Portable Jump Starter And Carry Them In Your Car.

Make sure both vehicles are turned off, with both parking brakes engaged. Park the cars next to each other. Follow these steps on how to properly jump start a car battery:

Put Both Cars In Park Or Neutral, Turn The Ignitions Off, And Put On The Parking Brake.

Locate the batteries after opening the hoods of each vehicle. Connect the red, or positive, clip on the jumper cables to the positive terminal on the dead battery. If you have those, you’re ready to follow these six steps… 1.